How to use a roll forming machine

September 30, 2018

1.Put on your safety glasses.

2.Place the socket that matches the guard bolts onto the 3/8-inch drive ratchet and loosen the nuts that hold the guard onto the top of the roll-forming machine.

3.Lift the guard up to remove it from the top of the roll former.

4.Blow out the area between the rolls with the air hose to remove metal shavings and other debris from the series of rolls, and spray the rolls with tool oil to add lubrication and prevent corrosion from forming on the face of the rolls.

5.Slide the guard back over the studs and tighten the nuts with the ratchet to secure the guard to the roll-forming machine.

6.Inspect the installed guard to ensure that no part of the guard falls into the feed area of the roll-forming machine and that the starting guide located on the feeder bed, in front of the guard, is not damaged.

7.Turn on the roll-forming machine by depressing the green start button.

8.Rest the side of the metal that is going to be roll formed against the starting guide and slide the metal toward the guide.

9.Support the metal sheet as it is grabbed by the roll-forming machine, works its way down through the series of rolls and is ejected from the far side of the roll-forming machine.

10.Inspect the finished rolled edge to ensure that the clearances are correct. If you notice that the seam is malformed or jammed tight, adjust the rolls according to the operating manual and run another piece of sheet metal through the roll-forming machine.

ก่อนหน้านี้

ติดต่อเรา

Author:

Ms. Wendy

Phone/WhatsApp:

+8615128799105

ผลิตภัณฑ์ยอดนิยม

You may also like

Related Categories

อีเมล์ให้ผู้ขายนี้

ชื่อเรื่อง:

อีเมล:

ข้อความ:

Your message must be betwwen 20-8000 characters

ติดต่อเรา

Author:

Ms. Wendy

Phone/WhatsApp:

+8615128799105

ผลิตภัณฑ์ยอดนิยม

Blog News

New bamboo glazed tile equipment

October 05, 2019

Matters needing attention when operating color steel tile press equipment

August 09, 2019

Ms. Wendy

อีเมล:

ส่งคำถาม

โทร:86-0317-7667606

Fax:

โทรศัพท์มือถือ:+8615128799105

อีเมล:

ที่อยู่:Baozi Village,Nanxiakou Town,Dongguang County, Cangzhou, Hebei